beautypg.com

ADC Campus-REX RS Interface Card User Manual

Page 50

background image

Set Up the Campus-REX System

3-22

Campus-REX RS Interface Card User Manual

4

To change the packet encapsulation format, type

then press

.

The Encapsulation option changes from HDLC to PPP.

5

To enable Spanning Tree, type

then press

. The Spanning Tree

option changes from Disable to Enable.

6

Type

then press

. The terminal prompts you to enter the local

IP address of the Campus-REX. This must be set for the Campus-REX
to respond to the application (SNMP) that uses the IP protocol.

7

Type the address, in decimal-dotted notation, then press

. The

Bridge/Router Configuration menu displays the new address.

8

Type

then press

. The terminal prompts you to enter the subnet

mask of the Campus-REX. This allows the Campus-REX to determine if
a host, such as an SNMP management station or trap receiver, is on the
same local subnet. If it is, the Campus-REX can send messages directly
to the host; if not, messages must be sent through a default router. This
must be set for the Campus-REX to respond to applications that use the
IP protocol.

9

Type the subnet mask, in decimal-dotted notation, then press

.

The Bridge/Router Configuration menu displays the new subnet mask.

10

Type

then press

. The terminal prompts you to enter the IP

address of the default router the Campus-REX uses to reach a host
(SNMP station or trap receiver) on another network.

Dec 9, 1999

ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx

13:17:00

Local Unit ID:

Campus-REX Unit #34

Local I/F:

REX

Remote Unit ID: Campus-REX Unit #12

Remote I/F: REX

Circuit ID:

Network Extension Circuit 5001

BRIDGE/ROUTER CONFIGURATION

MODE SETTING

1) Bridge/Router Mode:

Bridge

(Bridge, Router)

2) Encapsulation:

HDLC

(HDLC, PPP)

3) Timing Source:

Internal

(Internal, HDSL)

4) Spanning Tree:

Disabled

(Disabled, Enabled)

5) Local IP Address:

0.0.0.0

6) Local Subnet Mask:

255.255.255.0

7) Default Router:

0.0.0.0

8) BOOT Mode:

Local

(Local, Network)

(R)eturn

(M)ain Menu

ENTER CHOICE>

2

ENTER

4

ENTER

5

ENTER

ENTER

6

ENTER

ENTER

7

ENTER

CAD1069i5.book Page 22 Thursday, May 30, 2002 7:32 AM