ADC Campus-REX RS Interface Card - Manual (Page 26)

Installing the Campus-REX RS Interface Card
2-6 Campus-REX RS Interface Card User Manual
Connecting the Cable
To connect the 10BASE-T cable to the Campus-REX RS Interface Card:
1 Plug one end of the Category 3 cable into the 10BASE-T MDI connector
on the rear of the Campus-REX.
2 Connect the other end of the cable to your local equipment (repeater, PC,
or other 802.3 device).
120
VA C@60Hz
or 220
VA C@50Hz .2A Max
CF G
63 1 ETHERNET BRIDGE
10BaseT LIN K
Campus-RS Desktop Unit chassis
10BASE-T MDI port
Category 3 cable
Local equipment
(Ethernet)
10BASE-T port
CAD1069i5.book Page 6 Thursday, May 30, 2002 7:32 AM