ADC Campus-REX RS Interface Card - Manual (Page 23)

Installing the Campus-REX RS Interface Card
Campus-REX RS Interface Card User Manual 2-3
Installing into a Campus-Star Chassis
This section describes how to install the Campus-REX in a Campus-Star
chassis.
1 Slide the card into the guide rails in the desired slot on the rear of the
Campus-Star chassis.
Before installing the Campus-REX, make sure there is not a
Line Unit installed in the corresponding slot on the front of the
Campus-Star chassis. The Campus-REX is not
hot-swappable. Installing the Campus-REX with a
corresponding Line Unit installed may cause damage to the
Campus-REX, the Line Unit, or both.
620 D S X -1/T
C FG
DSX-1
620 D S X-1/T
C F G
DSX-1
Campus-REX RS Interface card
Campus-Star
chassis
C FG
CAD1069i5.book Page 3 Thursday, May 30, 2002 7:32 AM