Samsung SCH-A670ZSMXAR - Manual (Page 132)

124
calls, but you must unlock the phone to place calls (except to
emergency and secret numbers).
1. In standby mode, press the left soft key ( ) Menu , then
press , for Security . You’re prompted to enter the
lock code. The default lock code is the last four digits of
your telephone number.
2. Enter the lock code, then press
for
Lock Phone . The
options listed in the following table appear in the display.
3. Use the navigation key to highlight the Lock Phone option
of your choice.
4. Press to perform the function for the highlighted
option.
Important! If you change the NAM1 setting after setting the
phone to lock upon power-up and did not program a number
into NAM2, you won’t be able to access your phone. You
must call the Service Center to unlock your phone.
Change Lock
The default lock code is generally the last four digits of your
phone number. It is advisable to change the default lock code
to a secret code for security purposes.
1. In standby mode, press the left soft key ( ) Menu , then
press , for Security . You’re prompted to enter the
lock code.
Option Function
Never The phone remains unlocked.
On power up
The phone locks automatically the next time
your phone is powered on and stays locked until
you enter the lock code.
Now
The phone locks immediately and stays locked
until you enter the lock code.
MetroA670.book Page 124 Friday, November 12, 2004 12:03 PM