beautypg.com

Samsung SWD-M100ZKECLW User Manual

Page 58

background image

55

2.

Touch the System tab, then tap Backlight.

By default, the device is set up to automatically adjust the backlight

brightness level.

3.

Tap the Manual Adjustment radio box, then touch and drag

the slider to adjust the brightness level.

If the slider does not respond to a sliding action, tap the slider at a

different location to change the setting.

4.

Touch

to save your new selections and return to the

System tab.

Customizing Your Power Settings Page

Keeping track of the battery’s charge is very important. If the
battery level gets too low, your device automatically shuts down
and can cause you to lose important data.

1.

From the Today screen, touch Start (

) > Settings.

2.

Touch the System tab, then tap Power.

The Battery tab indicates the current charge state of the internal

battery.

Adjusting the Device’s Behavior - Battery Powered

1.

From the Today screen, touch Start (

) > Settings.

2.

Touch the System tab, then tap Power.

3.

Touch the Battery Power tab and begin to make your

changes.

4.

Touch a box to activate a feature and then alter its

corresponding field.

• Turn on backlight turns the backlight back on after a shutoff, when

a button is pressed or the screen is tapped.

• Turn off backlight provides a power save feature for your device to

conserve battery power by turning off only the screen. Values range
from Always on to 5 minutes.

• Turn off device provides a power save feature for your device to

conserve battery power by turning off the entire device. Values
range from Always on to 5 minutes.

5.

Touch

to save your new settings and return to the

System tab.

Adjusting the Device’s Behavior - Externally Powered

1.

From the Today screen, touch Start (

) > Settings.

2.

Touch the System tab, then tap Power.

3.

Touch the External Power tab and begin to make your

changes.

ok

ok

SWD-M100.book Page 55 Monday, March 8, 2010 8:09 AM