Samsung SCH-R380ZKAMTR - Manual (Page 50)

47
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (For
more information, refer to “Adding a New Contacts Entry”
on page 40) until you enter a name for the entry.
2. After entering the Contacts entry name, do not press .
Instead, highlight the number field to be assigned a Speed
Dial number.
3. Press Options, then select Set Speed Dial. The Speed Dial
screen appears in the display.
4. Highlight an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the Go To field.
Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to Voicemail (001),
information, Customer Care, and to emergency use (911).
5. Press SET. You are prompted to confirm your Speed
Dial number assignment.
6. Press Yes to save your Speed Dial assignment and return
to the Add New Entry screen.
Press No to discard the assignment and return to the
Speed Dial screen.
7. Press to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 38.)
2. Highlight the desired entry, then press Edit.
3. Highlight the number field marked by the Speed Dial icon
( ).
4. Press Options, then select Remove speed dial. “Remove
speed dial?” prompts you to confirm your desire to
remove the entry.
5. Press Yes to remove the Speed Dial assignment. “Speed
Dial Removed” pops up in the display, and you are
returned to the Edit Contact screen.
6. Do steps 2 through 7 of the “Assignment During Entry
Creation” procedure on page 47.