Samsung SCH-U700ZNAVZW - Manual (Page 36)

33
• Sensitivity: Sensitivity controls the balance between rejecting too much, which
means the phone frequently does not recognize names, numbers, or
commands, and rejecting too little, which means it frequently recognizes
something even if nothing was said. When Voice Commands rejects an
utterance, it displays a message such as “Please repeat…” or “No match
found.” If you frequently experience these messages, you might be able to get
better recognition by selecting the Sensitivity setting Reject Less. If you frequently
experience false activations (Voice Commands detects a wrong match), you
might be able to get better performance by selecting the Sensitivity setting Reject
More.
• Train Voice: Use the Train Voice menu to adapt digit dialing and name dialing
to your voice.
• Prompts: Allows you to select the voice command system characteristics.
- Mode: Select the voice command system mode from the following:
- Prompts - for handset to read out voice command prompts
- Readout - for handset to read out prompts, dialing digits, menus, and TXT
messages (regardless of individual settings for these above)
- Tones Only - for handset to prompt you with a tone only
- Audio Playback: Allows audio playback to play through the speakerphone or
through the earpiece.
- Timeout: Allows you to set the timeout interval. If not used within 5 sec or 10 sec
Voice Command will timeout and return to the main screen.
• Call Alert: Provides audible readout of the phone number and/or name (if in
your contact list) of an incoming call.
• Key Setting: Allows you to select the method the Voice Command menu can
be accessed. Select Voice Key Only, Voice Key / Headset, Voice Key / Flip.
Voice Commands
The following is a list of functions that you can perform
using Voice Commands speech recognition on your
phone.
• Call : Dial by saying a Name in your
Contacts List, a Name and a Location (home, work,
mobile) or the phone number.
• Send : Send a text, picture, or video
message to a number or to someone in your Contacts
List.
• Goto
device.
• Check : Provides details of your phone status, voicemail, messages,
missed calls, time, signal strength, battery level, and volume level.