Samsung SC-D372-XAA - Manual (Page 97)

ENGLISH
93 93
USB Interface (SC-D375(H)/D975 only)
Transferring a Digital Image through a USB Connection
✤ The Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
✤ You can transfer a recorded file on a Memory Card to your PC via a USB connection.
✤ If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0)
supplied with the Camcorder.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
■ Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
■ Windows XP - High speed USB on a system with Service Pack 1 or later installed.
■ Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
■ USB interface is not supported on Windows ® VISTA(64bit) and Macintosh operating systems.
■ System requirements mentioned above are recommendations. Even on a system that satisfies the requirements may not ensure the operation
depending on the system.
[ Notes ]
■ On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.
■ On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.
■ Intel ® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.
■ Windows ® is a registered trademark of the Microsoft ® Corporation.
■ All other brands and names are property of their respective owners.
■ Operations are not guaranteed for all of the recommended computer environments mentioned above.
■ Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
■ In or mode, be sure that the Memory Card is inserted into Camcorder before connecting USB cable. If no Memory Card
or an unformatted Memory Card is inserted, PC will not recognize your Camcorder as a removable disk.
■ USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
■ If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.
■ If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work
properly. If this occurs, remove all other USB devices and try the connection again.
Using USB Interface
CPU Intel ® Pentium 4™ , 2GHz
OS(Operating System) Windows ® 2000/XP/VISTA(32bit)
* Standard installation is recommended.
Operation may not assured if the above OS has been upgraded.
Memory 512MB
HDD capacity 2GB or more
Resolution 1024 x 768 dots 24bit Color
USB USB2.0 High Speed
Windows System
01227A SCD371 USA~098 2/1/07 9:40 AM Page 93