Using the pc camera function – Samsung SC-D372-XAA User Manual
Page 101
ENGLISH
97
97
USB Interface (SC-D375(H)/D975 only)
Using the PC Camera Function
✤ This function works only in
✤ To use the PC Camera function, DV Driver, Video Codec and DirectX 9.0 programs must be installed in the PC.
✤ When you connect to a Web site that provides video chatting functions, you can use your Camcorder to participate.
✤ When using this camcorder for video conferencing (such as Net Meeting), voice communication may not be supported
depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the
PC to enable voice communication.
✤ Using the Camcorder with PC Net Meeting program installed, you can participate in video conference.
✤ The PC Camera's screen size (Transferred video frame rate for the PC Camera function is max 15 fps.)
- 640X480 (VGA) pixels for USB 2.0 connection.
✤ If PC is connected with the USB to the Camcorder, only the [Power] switch, [Mode] switch, [Zoom] lever can be
operated.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end
to the USB connector on your computer.
1
2
01227A SCD371 USA~098 2/1/07 9:40 AM Page 97