Samsung SC-D453-XAA - Manual (Page 88)

ENGLISH
84 84
USB Interface
✤ To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.
✤ You can use this Camcorder as a PC Camera. This is useful when connecting to a Web site that provides video chatting
functions.
✤ When using this camcorder for video conferencing (such as NetMeeting), voice communication may not be supported
depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the PC to
enable voice communication.
✤ You can participate in video conferencing by using the Camcorder with PC Net-meeting program installed.
✤ The PC Camera's screen size (Transfer video frame rate for the PC Camera function is max 15 fps.)
■ 320X240 (QVGA) pixels for USB 1.1 connection.
✤ If PC is connected with the USB to the Camcorder, only the Power, Mode and Zoom switches can be operated.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the
USB connector on your computer.
Using the PC Camera Function
1
2