Samsung SC-D453-XAA - Manual (Page 75)

ENGLISH
71 71
Playback
Connecting to a TV which has no Audio and Video Input Jacks
Playback
✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with the Multi-AV cable.
■ The yellow jack: Video
■ The white jack: Audio(L) - Mono
■ The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE.
5. Turn on both the TV and VCR.
■ Set the input selector on the VCR to Line.
■ Select the channel reserved for your VCR on the TV set.
6. Play the tape.
✤ You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
3. Insert the tape you wish to play back.
4. Using the
/ (REW/FF) buttons, find the first position you wish to play back.
5. Press the (PLAY/STILL) button.
■ The images you recorded will appear on the TV after a few seconds.
■ If a tape reaches its end while being played back, the tape will rewind automatically.
[ Notes ]
■ The playback mode (SP/LP) is determined by the mode in which the tape was recorded.
■ If the VCR has an S-Video input terminal, you may use S-Video Connector for better quality.
■ The S-Video Connector transmits video only. Connect Audio cables for sound.
■ If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
DV
USB
AV/ S
Antenna
S-Video input
TV
VCR
Camcorder Video input-Yellow
Audio input(left)-White
Audio input(right)-Red
Audio/Video/
S-Video