Samsung SC-D453-XAA - Manual (Page 73)

ENGLISH
Playback
69 69
✤ The Speaker works only in Player mode.
✤ When you use the LCD screen for playback, you will hear recorded sound from the built-in Speaker.
-
Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
3. Press the (PLAY/STILL) to play the tape.
4. Use the Menu selector to adjust the volume.
■ A volume level display will appear on the LCD screen.
Levels may be adjusted from anywhere between 00 to 19. You will not hear any sound when
the volume is set on 00.
■ If you close the LCD screen while playing, you will not hear sound from the speaker.
[ Notes ]
■ When the AV cable is connected to the Camcorder, you will not hear sound from the Built-In Speaker
and cannot adjust the volume.
■ The sound will return when you remove the connected AV cable from the jack of your Camcorder.
Controlling Sound from the Speaker
60min
0:46:00:11
† …
SP √
[05]
3
4