Samsung SMX-F50SN-XAA - Manual (Page 68)

8 9 8 9
ANTI-SHAKE (HDIS)
Use the Anti-Shake (HDIS) function to compensate for unstable
images caused by shaking movements when holding the
camcorder.
Select the Record ( / ) mode by pressing the MODE button.
page 24
1. Press the MENU button 
Control (Left/Right) button 
“Anti-Shake (HDIS).”
2. Select the desired submenu item
with the Control (Up/Down)
button, and then press the OK
button.
3. Press the MENU button to exit the
menu.
Tip
Use the Anti-Shake function in the following cases:
When recording while using the zoom extensively.
When recording a close up picture of a small object.
When recording while walking, or moving.
When recording through a window from inside a vehicle.
•
•
•
•
The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to
On.
Gross camcorder shake may not be entirely corrected even if “Anti-
Shake (HDIS): On” is set. Firmly hold the camcorder with both
hands.
When this function is set to “On,” the actual movement of the subject
and the movement displayed on the screen may be slightly different.
Recording in low lighting and at high magnification with this function
set to “On” may cause after images. If this occurs, we recommend
using a tripod (not supplied) and turning the “Anti-Shake (HDIS)” to
“Off.”
•
•
•
•
Recording options
Submenu Items
Items Use
On-screen
display
Off To disable the function. -
On
To enable the Anti-Shake (HDIS) function to
compensate for shaking movements.
Exit
STBY 0:00:00 [475Min]
Anti-Shake(HDIS)
Off
On
STBY 0:00:00 [475Min]
Anti-Shake(HDIS)
Off
On
Exit