Connecting to a tv, Connecting to a tv (16:9/4:3) – Samsung SMX-F50SN-XAA User Manual
Page 102
92
9
92
9
VIDEO
AUDIO
L
R
VIDEO
AUDIO
Red
Yellow
White
White
Yellow
Stereo Type
Mono Type
Connecting to a TV
You can view the recorded videos and photos on a large screen by connecting the camcorder to a TV.
CONNECTING TO A TV (16:9/4:3)
To playback your recordings, the television must be NTSC-compatible. We recommend that you use the AC power adaptor as a power
source for the camcorder when you connect it to a TV. Check your TV’s input jacks and select the appropriate connection method according
to the jack type. For details, refer to your TV user manual.
Use the provided Audio/Video cable to connect the camcorder to a TV as follows:
1.
Connect the provided Audio/Video cable to the Audio/Video jack on the TV.
2.
Turn on your TV and set the TV’s input selector to the Input your camcorder is connected to.
Refer to the TV’s instruction manual to see how to select the TV input.
If only a mono audio input is available on the TV set, use the white plug (audio L) on the audio cable.
Do not use excessive force when connecting the cables.
We recommend you use the AC power adaptor as the power source.
Before connecting, make sure that the volume on the TV is turned down. Forgetting to do this may cause feedback from the TV speakers.
Carefully connect the input and output cables to the corresponding connections on the TV.
•
•
•
•
•
•
CARD
VIDEO
AUDIO
L
R
TV
Camcorder
Signal flow
Audio/Video cable