Samsung BD-H6500-ZA - Manual (Page 34)

34
English
Media Play
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1. On the Playback screen, use the ▲▼◀▶
buttons to select in the lower left
corner of the screen, and then press the
v button.
2. Use the ▲▼ to select the repeat mode
you want - Off, One Song, or All - and
then press the v button.
00:00:39 00:02:38
TRACK 001
TRACK 001 00:43
TRACK 002 03:56
TRACK 003 04:41
TRACK 004 04:02
TRACK 005 03:43
TRACK 006 03:40
TRACK 007 04:06
TRACK 008 03:52
TRACK 009 03:04
TRACK 010 04:02
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an
audio CD (CD-DA/MP3) at random.
1. On the Playback screen, use the ▲▼◀▶
buttons to select in the lower left
corner of the screen, and then press the
v button.
2. Use the ▲▼ to set the Shuffle mode On
or Off, and then press the v button.
Creating a Playlist from an Audio CD
1. With the Playback screen displayed, select
the button, and then press the v
button. The Settings menu appears.
2. Use the ▲▼ buttons to select Play
Selected, and then press the v button.
The Selection Play screen appears.
3. Use the ▲▼ buttons to select a track,
and then press the v button. A check
appears to the left of the track.
4. Repeat Step 3 to select and check
additional tracks.
5. To remove a track from the list, move to
the track, and then press the v button
again.
The check on the track is removed.
6. When done, press the ▲▼ button to
select Play, and then press the v button.
The Music Playback screen reappears
listing only the tracks you checked. The
selected tracks play automatically.
| NOTE |
\ You can create a playlist with up to 99 tracks on
Audio CDs (CD-DA).
\ If you have created a playlist, Play Selected is
replaced by Edit Playlist on the Settings menu.
\ On the Selection Play screen, you can also choose
Select All, Clear All, and Cancel.
- Use Select All to select all tracks. This cancels your
individual track selections. When you press the
RETURN button on your remote control or select
the Play button, and then press the v button, all
tracks will appear on the Music Playback screen,
and the product will begin to play all tracks from
Track 001.
- Use Clear All to deselect all selected tracks at
once. Then, select individual tracks or use Select
All to select all the tracks, and then press the
RETURN button on your remote control. If you do
not use Select All or select individual tracks, the
Playlist will not change.
- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback
screen, the Playlist will be unchanged.
Ripping
1. Insert a USB device into the USB jack on
the front of the product.
2. With the Playback screen displayed, select
the button and then press the v
button. The Settings menu appears.
3. Use the ▲▼ buttons to select Ripping,
and then press the v button. The
Ripping screen appears.