Answering calls – Samsung SPH-A790ZKSXAR User Manual
Page 32
Tip:
To redial your last outgoing call, press TALK twice.
When making calls while roaming off the Sprint Nationwide PCS
Network, always dial using 11 digits (1 + area code + phone number). For
more information, see "Sprint PCS International Roaming" on page 177.
Section 2A: Your Sprint PCS Phone - The Basics
23
You can also place calls from your Sprint PCS Phone by using
Sprint PCS Voice Command
SM
(page 173), Speed Dialing numbers
from your Contacts (page 29), and using your Call History listings
(page 86).
Tip:
To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (For information on setting up
speed dial numbers, see “Assigning Speed Dial Numbers” on page 92.)
(This feature will not work when you are roaming off the Sprint
NationwidePCS Network; when roaming you must dial using eleven
digits [1 + the area code + the seven-digit phone number.])
Answering Calls
To answer an incoming call:
1.
Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2.
Press
to answer an incoming call. (Depending on your
phone’s settings, you may also answer incoming calls by
opening the phone or by pressing any number key. See “Call
Answer Mode” on page 50 for more information.)
Your Sprint PCS Phone notifies you of incoming calls in the
following ways:
ⅷ
The phone rings or vibrates (unless set to Silence All).
ⅷ
The LED flashes.
ⅷ
The backlight illuminates.
ⅷ
The screen displays an incoming call message.