beautypg.com

Change phone password, Change pin code, Change pin2 code – Samsung SGH-T819CNATMB User Manual

Page 153: Software update

background image

Changing Your Settings 150

Software Update

The following options are available:

Off: you can call any number.

On: you can only call phone numbers stored in Phone book. You must enter your

PIN2. The following options are available:

-

Full length entries or wild cards can be entered in to the FDN list.

-

A full length number with a specific contact name can be entered into the FDN list.

-

Wildcard entries allow a range of numbers to dial with a single entry: ex. 555 – All
dialed numbers that begin with 555 are allowed. Numbers that do not match the
conditions in the FDN list are restricted.
Note: Entering an asterisk (*) is not required for wild card entries.

Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.

Change Phone Password

The Change phone password feature allows you to change your current phone
password to a new one. You must enter the current password before you can specify
a new one.

Once you enter a new password, you are asked to confirm it by entering it again.

Change PIN Code

This feature allows you to change your current PIN, provided that the PIN Lock
feature is enabled. You must enter the current PIN before you can specify a new one.

Once you enter a new PIN, you are asked to confirm by entering the PIN a second
time.

Change PIN2 Code

The Change PIN2 feature allows you to change your current PIN2 to a new one. You
must enter the current PIN2 before you can specify a new one. Once you enter a new
PIN2, you are asked to confirm by entering the PIN2 a second time.

Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.

Software Update

The Software Update feature enables you to use your phone to connect to the
network and upload any new phone software directly to your phone.

1.

When the Idle mode displays, press the Menu

soft key.

2.

Select Settings and press the Select

soft key or the

key.