Settings – Samsung GX-SM530CF-XAA User Manual
Page 44

42
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the
Smart Media Player
and each other using a peer-to-peer network, without a
wireless router.
▶
Some Wi-Fi Direct devices may not support the Samsung Link function if connected via Wi-Fi Direct. If this
is the case, we recommend changing the network connection method between the devices.
▶
Bluetooth transmissions can interfere with the Wi-Fi Direct signal. Before you use the Wi-Fi Direct function,
we strongly recommend that you turn off the Bluetooth function of any active mobile device.
1.
Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function.
2.
In the Home screen, select Settings, and then press the E button.
3.
Select Network, and then press the E button.
4.
Select Wi-Fi Direct, and then press the E button.
The Wi-Fi Direct devices that your product can connect to appear.
5.
You have three ways to complete the Wi-Fi connection:
- Through the Wi-Fi device.
- Through the
Smart Media Player
using PBC.
- Through the
Smart Media Player
using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.
2.
When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to
connect. Select OK, and then press the E button to accept.
3.
The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as
connected.
Settings
h Network