Samsung EC-WB350FBPWUS - Manual (Page 116)

Wireless network
115
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] or touch to open AP setting options.
‡ When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p. 118)
‡ When a login page appears, refer to "Using the login browser". (p. 116)
‡ When you select an unsecured AP, the camera will automatically connect to
the WLAN.
‡ If you select a WPS profile supported AP, select → WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS profile
supported AP by selecting → WPS button connection on the camera, and
then pushing the WPS button on the AP device.
‡ If a pop-up message about data collection regulations appears, read and
agree to it.
Connecting to a WLAN
1
Rotate the mode dial to w.
2
Select , , , , or .
3
Follow the on-screen instructions until the Wi-Fi Setting screen
appears.
‡ The camera automatically searches for available AP devices.
‡ In some modes, press [m], and then select Wi-Fi Setting.
4
Select an AP.
Refresh
Back
‡ Select Refresh to refresh the list of connectable APs.
‡ Select Add wireless network to add an AP manually. The AP name must be
in English to add the AP manually.