Agilent Technologies E4438C - Manual (Page 46)

Required Equipment
2-6
Phase Noise System,
Input: APC 3.5 (m) Agilent E5502B Option 001
phase noise system with
Option 401
or Option 402 added
Option 401 adds an
Agilent 8662A
high-performance RF signal
generator
Option 402 adds an
Agilent 8663A
high-performance RF signal
generator
Only required for
Options UNJ and 506.
Reference Source,
Output: Type-N (f) Agilent 8662A/8663A
high-performance RF signal
generator
Mixer (0.5 to 9 GHz),
Connectors: SMA (f) MD/MDC-164 Mixer
M/A COM INC.
DIV of AMP INC.
1011 Pawtucket Blv.
Lowell, MA 01853
Phone: (800) 366-2266
0.5 to 9 GHz
Mixer (1.0 to 2.8 GHz),
Connectors: SMA (f) MD/MDC-174 Mixer
M/A COM INC.
DIV of AMP INC.
1011 Pawtucket Blv.
Lowell, MA 01853
Phone: (800) 366-2266
1.0 to 2.8 GHz
10 dB Attenuator,
Type-N (f) to (m) Agilent 8491A/B Option 010
fixed attenuator 10 dB, dc to 6 GHz
20 dB Attenuator,
Type-N (f) to (m) Agilent 8491A/B Option 020
fixed attenuator 20 dB, dc to 6 GHz
Step Attenuator,
Input: Type-N (f)
Output: Type-N (f) Agilent 8495G programmable
step attenuator 0 to 70 dB
Step Attenuator Driver Agilent 11713A
step attenuator driver
Step Attenuator Driver
Cable Agilent 8120-2703
step attenuator driver cable
Table 2-1 Required Equipment
Test Equipment Preferred Model
or Alternate Model Critical Specifications