I/q gain/offset/quadrature calibration, Description, Required test equipment – Agilent Technologies E4438C User Manual
Page 133: Procedure, I/q gain/offset/quadrature calibration -41, Description -41, Required test equipment -41, Procedure -41
Adjustments
I/Q Gain/Offset/Quadrature Calibration
4- 41
I/Q Gain/Offset/Quadrature Calibration
Description
This calibration determines the required I/Q gain, offset, and quadrature calibration constants/arrays that
will minimize the I/Q modulation imperfections on the A13 Output. Several calibration constants are
determined and then the I/Q gain, offset, and quadrature DACs are adjusted over frequency to minimize the
static vector modulation errors. The results are stored in the signal generator as calibration arrays.
Required Test Equipment
• None
Procedure
1. Preset the signal generator.
2. Follow the instructions as they appear on the controller’s display.