Agilent Technologies E4438C - Manual (Page 35)

Getting Started
Running Service Support Software
1- 25
NOTE If necessary, the test equipment GPIB address can be changed after it is added to the Selected
Test Equipment box. Change the GPIB address by pressing the right arrow on the keyboard
until the GPIB address selection in the Selected Test Equipment box is selected. (The GPIB
address is selected when it has a dark box around the selection.) Then, type the new GPIB
address and press Enter to change the address.
e. Repeat the previous steps for each test equipment instrument.
4. Once the test equipment has been identified, select the Add button located above the Selected Tests box to
add each of the highlighted performance tests or adjustments. The tests or adjustments that were
highlighted are now displayed in the list in the Selected Tests box.
The following buttons are available for the Selected Tests box:
Add Copies the tests and adjustments highlighted in the list of tests and adjustments to the
Selected Tests box.
Remove Removes the highlighted tests and adjustments from the Selected Tests box.
Clear Removes all of the tests and adjustments from the Selected Tests box.
5. If the appropriate tests or adjustments are listed in the Selected Tests box and the appropriate test
equipment is listed in the Selected Test Equipment box, select the OK button.