Starting the multi slide show ( ), Selecting images setting play interval – Samsung EC-HZ50WZBPBUS User Manual

Page 91

090

Starting the Multi Slide Show (

)

Selecting Images

Setting play interval

To set the Multi Slide Show play interval:
1. Select the [Interval] sub-menu by

pressing the Up / Down button, and
then pressing the Right button.

2. Use the Up / Down button to select

the desired interval.

3. Press the OK button to save the

configuration.

Image loading time depends on the image size and quality.

The camera displays only the first frame of a Movie file in a slide
show.

Voice recording files are not displayed in a slide show.

To set an interval, you must set Effect to [Off] (See page 91).

You can select images to view in a slide show. [Select] lets collect
images into separate groups labeled [Select1], [Select2], or [Select3].
When you play a slide show, you select the group you want to play.
To collect images into a group, follow these steps:
1. In the Multi Slide Show menu, use the

Up / Down button to select Images, and
then press the OK button.

2. Use the Up / Down button to select

[Select], and then press the OK button.
The Select window appears.

3. Press the Up / Down button to select [New

Select] (if necessary), and then press the OK button. The camera
displays Processing, and then displays image thumbnails.

4. Press the Up / Down / Up / Down button to highlight an image. Press

the OK button to select the image. A check mark appears on the image.
- The images will appear in the order you select them.

5. Repeat Step 4 for each image you want to included. Press the

Fn button when done.

To play a slide show of a group of selected images, follow these steps:
1. On the Multi Slide Show menu, use the Up / Down button to select

[Images], and then press the OK button.

2. Use the Up /Down button to select [Select] (or Select 1, 2, or 3,

depending on what your camera is displaying), and then press the
OK button. The Select window appears.

3. On the Select window, use the Up / Down button to select the

group you want to play, [Select 1, 2, or 3]. The thumbnail screen
for that group appears.

4. Press the Fn button. You are returned to the Main menu.

å When you save the first group, it is saved as [Select1]. When you

save a second group, that group is saved as [Select1] and the
previous group is saved as [Select2]. When you save a third group,
that group is saved as [Select1], the previous [Select1] group is
saved as [Select2], and the previous [Select2] group is saved as
[Select3]. If you save a fourth group, the fourth group supplants
the previous [Select1], the previous [Select1] group supplants the
[Select2] group, and the [Select2] group supplants the [Select3].

5. Select [Multi Slide Show] again, and then press the OK button.
6. Select [Start], and then press the OK button.
7. Select [Play] for single cycle play or [Repeat] for continuous, repetitive

play, and then press the OK button. The slide show begins.

Back Set

Images :All

Interval :1

sec

Music :Off

Effect :Off

Start

All
Date

Select