Samsung EC-HZ50WZBPBUS - Manual (Page 90)

089
Starting the Multi Slide Show ( )
Your camera can display images at pre-set intervals in a slide show. You
can view the Multi Slide Show on the camera’ LCD screen or connect
the camera to an external monitor and view it on the monitor’s screen.
1. Press the Play mode button, and then press the menu button.
2. Press the Up / Down button, select the [Multi Slide Show] menu
tab, and then press the OK button.
Start the Multi Slide Show
The Multi Slide Show can start only in the Multi Slide Show [Start] menu.
1. Use the Up / Down button to select the [Start] menu, and then
press the Right button.
2. Select a desired sub-menu by pressing
the Up / Down button.
[Play] : The Multi Slide Show stops
after one cycle.
[Repeat] : The Slide Show repeats until
cancelled.
3. Press the OK button and the slide show starts.
- To pause the slide show while playing it back, press the OK
button again.
- Pressing the OK button again will cause the Multi Slide Show
restart.
- To stop playback of the Multi Slide Show, press the OK button,
and then press the Left or Right button.
View ( )
You can view thumbnails and easily categorize or search a large
number of pictures and videos.
1. Press the MENU button in playback
mode.
2. Press the Up/Down button to select
View, and then press the OK button.
3. Press the Up/Down button to select
Single, 9, or 20, and then press OK.
Exit Back
9
20
Single
Back Set
Images :All
Interval :1 sec
Music :Off
Effect :Off
Start
Play
Repeat