Samsung CLX-4195N-XAX - Manual (Page 317)

Scan features
317 4. Special Features
23
Scanning to FTP/SMB server
This feature may not be available depending on model or optional goods
(see "Features by model" on page 7).
Setting up an FTP/SMB server
1 Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 340).
2 Select Address Book > Individual > Add.
3 Check the box next to Add FTP or Add SMB.
4 Enter the IP address in dotted decimal notation or as a host name.
5 Enter the server port number, from 1 to 65535.
6 Check the box next to Anonymous, then the server permits the access
of unauthorized people.
7 Enter the login name and password.
8 Enter the domain name if your server is joined to the certain domain,
otherwise just enter your computer name which is registered to the SMB
server.
9 Enter the path for saving the scanned image.
• The folder to save the scanned image must be on the root.
• The folder properties need to be setup as a share.
• Your user name should have the rights to read and write the folder.
10 Press Apply.
Scanning and sending to FTP/SMB server
1 Make sure that your machine is connected to a network.
2 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 61).
3 Select (scan) > Scan To SMB or Scan To FTP on the control panel.
Or select Scan > SMB or FTP on the touch screen.
4 Select a server and scan format you want.
5 The machine begins scanning and then sends the scanned image to the
specified server.