Adjusting the volume level, Speed dialing, Speakerphone – Samsung SPH-M340DAACMU User Manual
Page 22: Caller id function
19
Adjusting the Volume Level
You can adjust the volume level while on an active call
or from the main screen.
ᮣ
Press and hold the volume key (
) up or
down.
Speed Dialing
Ideal for frequently dialed numbers, this feature
allows you to dial entries in your contact list using the
keypad with only one or two key presses. You can
store up to 99 numbers in your phone’s speed dial
and then activate them by either pressing a button or
two. With this feature, you can speed-dial phone
numbers with one key press (for locations 2–9) or two
key presses (for locations 10–99). For more
information, refer to “Creating Speed Dial
Assignments” on page 36.
One Digit Speed Dialing (2 - 9)
ᮣ
Press and hold the corresponding memory number
for more than 1 second. The display then confirms
what number was dialed by showing the name and
number of the outgoing speed dial call.
Two Digit Speed Dialing (10 - 99)
ᮣ
Press and release the first digit, then press and
hold the second digit for more than 1 second. The
display then confirms what number was dialed by
showing the name and number of the outgoing
speed dial call.
Note: Location 1 is reserved for voicemail. Locations 2-99 are
unassigned. To assign a speed dial location, please see
page 36.
Speakerphone
The speakerphone feature lets you hear audio through
the speaker and talk without holding the phone.
1.
To activate the speakerphone while on a call,
select Spkr on (Left Option Button). The
Speaker icon displays on the screen.
2.
Select Spkr off (Left Option Button) to make the
phone route audio back through the earpiece.
The phone also returns to this “normal”
operation after ending a call or when the phone
is turned off and back on.
Caller ID Function
Identifies an incoming caller by displaying their phone
number. If the caller’s name and number are already
stored in your Contacts list, both their name and
number displays on the screen. If you choose not to
display your number to the receiving party, just follow
these easy steps.
1.
Press
.
2.
Use your keypad to enter the number you wish
to call.
3.
Press
. This temporarily blocks your
contact information from displaying on the
recipient’s phone.
Common Cents M340.book Page 19 Thursday, April 1, 2010 12:36 PM