Samsung SMX-C20RN-XAA - Manual (Page 92)

78
settings options
LCD Enhancer
Contrast is enhanced for a clear and bright image. This effect is also implemented outdoors in bright daylight.
1. Press the Control button ( / ) "LCD Enhancer"
OK button.
2. Select the desired submenu item with the Control button ( / )
OK button.
3. Press the MENU button to exit the menu.
Auto LCD Off
To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is
idle for more than 2 minutes.
1. Press the Control button ( / ) "Auto LCD Off"
OK button.
2. Select the desired submenu item with the Control button ( / )
OK button.
3. Press the MENU button to exit the menu.
Submenu items
Off: Disables the function
On: When the camcorder is idle for more than 2 minutes in Video or Photo
STBY mode, or for more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD screen.
•
•
Submenu items
Off: Disables the function
On ( ): LCD Enhancer operates. •
•
LCD Enhancer function does not affect the quality of the image being recorded.
When the LCD Enhancer works at low illumination, some stripes may occur on the LCD screen.
This is not a malfunction.
Using the LCD Enhancer function may cause color to look different on the display. •
•
•
When the "Auto LCD Off" function is enabled, you can press any button on the camcorder to
return LCD brightness to normal.
Auto LCD Off will be disabled in the following cases:
- If the DC power cable (AC power adaptor, USB cable) is connected. •
•
Settings
LCD Enhancer
LCD Brightness
LCD Color
Exit
STBY 0:00:00 [475Min]
Select
:
: 0
Settings
Transparency
Auto LCD Off
Menu Design
Exit
STBY 0:00:00 [475Min]
Select
:
: 0%
:
Settings
Transparency
Auto LCD Off
Menu Design
Off
On
Exit Move Select
STBY 0:00:00 [475Min]
Settings
LCD Enhancer
LCD Brightness
LCD Color
Off
On
Exit Move Select
STBY 0:00:00 [475Min]