Samsung SMX-C20RN-XAA - Manual (Page 108)

94
connecting to other devices
You can view the recorded videos and photos on a large screen by connecting the camcorder to a TV.
CONNECTING TO A TV
To playback your recordings, the television must be NTSC-compatible. ²page 99
We recommend that you use the AC power adaptor as power source for the camcorder.
Use the provided Audio/Video cable to connect the camcorder to a TV as follows:
1. Connect the end of the Audio/Video cable with the single plug to the Audio/Video cable jack
of the camcorder.
2. Connect the other end with video (yellow) and right (red)/left (white) audio cables to the TV.
•
•
VIDEO AUDIO
Monaural Type
Red
VIDEO AUDIO
L R
White
Yellow
Stereo Type
Normal TV
Camcorder
Signal fl ow
AV
AV Cable
Red Yellow White
Make sure that the Audio/Video cable is connected to the TV and the camcorder. You cannot view
the image or hear the sound if the cable is not connected properly.
When you connect the Audio/Video cable, match the color of the Audio/Video cable jack and the
TV terminals.
Don’t apply excessive force when inserting or extracting the cable into/from the Audio/Video cable.
Use the AC power adaptor when connecting the cable to the TV.
When the Audio/Video cable is connected to the camcorder, you should control the volume on the
TV.
The screen ratio of the TV and the camcorder may differ depending on the connected TV. •
•
•
•
•
•