Samsung SMX-C20RN-XAA - Manual (Page 120)

106
Playback on other devices (TV, etc.)
Symptom Explanation/Solution
You cannot view the image
or hear the sound on the
connected device.
Connect the audio line of the Audio/Video cable jack to your camcorder
or to the connected device (TV, DVD recorder, etc). (Red color- right,
White color- left)
The Audio/Video cable jack is not connected properly. Make sure that
the Audio/Video cable jack is connected to the proper jack.
²page 94, 96 •
•
Playback on your camcorder
Symptom Explanation/Solution
Pressing the playback
(Play/Pause) button will not
start playing.
Press the Mode button to set Video Play mode.
Image files recorded by other devices may not be played on your
camcorder.
Check out the memory card compatibility.
²page 32
•
•
•
The Skip or Search function
does not work properly.
If the temperature inside the camcorder is too high, it cannot function
properly. Turn the camcorder off, wait for a few minutes, and then turn
it on again. •
Playback is interrupted
unexpectedly. Confirm that the AC adaptor or battery pack is properly connected and
stable. •
You cannot hear the sound
when playing video recorded
by Time Lapse REC.
The Time Lapse REC does not record sound. (mute recording)
²page 56 •
Photos stored on a storage
media are not displayed in the
actual size.
Photos recorded on other devices may not appear in the actual size.
This is not an error. •
Connecting/Dubbing with other devices (TV, DVD recorder, etc.)
Symptom Explanation/Solution
You cannot dub correctly
using the Audio/Video cable.
The Audio/Video cable is not connected properly. Make sure that the
Audio/Video cable is connected to the proper jack, i.e. to the input jack
of the device used for dubbing an image from your camcorder.
²page 94, 96 •
troubleshooting