Samsung SMX-C20RN-XAA - Manual (Page 69)

55
This right side of the bar shows the digital zooming zone.
The zooming zone appears when you move the zoom lever.
When "Wind Cut" is "On", some low frequency sound is eliminated along with the sound of the wind.
Wind Cut
You can reduce wind noise when recording sound with the built-in microphone. If "Wind Cut : On" is set,
the low-frequency components in the sound picked up by the microphone will be cut off during recording.
This makes it easier to hear voices and sound during playback. Use Wind Cut when recording in windy places
such as a beach.
Submenu items
Off: Disables the function.
On ( ): Minimizes wind noise or other noise while recording. •
•
1. Press the MENU button Control button ( / )
"Wind Cut."
2. Select the desired submenu item with the Control button
( / ) OK button.
3. Press the MENU button to exit the menu.
Digital Zoom
You can select the maximum zoom level if you want to zoom to a level greater than 10x (the default setting)
during recording. Zoom up to 10x is achieved optically, and after that, zoom up to 1200X is achieved digitally.
Note that the image quality decreases when you use the digital zoom.
Submenu items
Off: Only optical zoom is available up to 10x.
On: Digital zoom is available up to 1200x. Moving the zoom
lever displays the digital zoom bar.
•
•
1. Press the MENU button Control button ( / )
"Digital Zoom."
2. Select the desired submenu item with the Control button ( / )
OK button.
3. Press the MENU button to exit the menu.
The image quality may deteriorate depending on how much you zoom in on the subject.
Maximum zooming may result in lower image quality. •
•
0:00:00 [475Min] STBY
9999
Wind Cut
Off
On
Exit
STBY 0:00:00 [475Min]
Digital Zoom
Off
On
Exit
STBY 0:00:00 [475Min]
0:00:00 [475Min] STBY
9999