Samsung NP900X4D-A04US - Manual (Page 110)

108 109
Chapter 5.
Troubleshooting
Q&A
Display Related
Q1 The Desktop displayed on the TV after connecting via
the HDMI port does not fit the screen.
A Go to the Graphics Control Panel to adjust the screen
settings.
► For Intel graphics cards
Right-click over the Desktop and go to Graphics Properties
> Display > General. Adjust the Horizontal Ratio and
Vertical Ratio settings to fit your screen and click OK.
► For AMD graphics cards
1. Right-click over the Desktop and select Graphics
Properties > Desktop and Display > My Digital Flat
Panel > Expansion Options (Digital Flat Panel).
2. Adjust the control bar to fit the TV corners and click Apply.
Sound Related
Q1 I cannot hear any sound from the TV after connecting
via the HDMI port.
A 1. Right-click over the taskbar on the Desktop and click Play
Device.
2. Change the option to Digital Audio (HDMI), HDMI device,
HDMI Output or another option and click Set as Default.
Then click OK.
Others
Q1 You can configure your computer in the same way as
existing Windows systems.
A If you want to start your computer in DOS via a USB device,
set the Fast BIOS Mode item in the Advanced menu in the
BIOS Setup to Disabled before using this feature.