Alpine F1 STATUS PXI-H990 - Manual (Page 99)

95
- EN
6
Press 1 ( ) or 5 ( ), select “STORE [Store]”,
then press 2 (ENT).
7
Press 1 ( ) or 5 ( ), select “PRESET NO
[Preset No.]”, then press 2 (ENT).
8
Press 1 ( ) or 5 ( ), select the preset number
at which the settings are to be stored, then
press 2 (ENT).
Approximately 5 seconds are required for the
processing to be completed.
9
Once the settings are completed, press and
hold F
• SETUP for at least 3 seconds.
• Press 6 (RTN) or RETURN on the remote control in
the setting mode to return to the previous item.
○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Supplement See page 104 for supplementary information.
PRESET
STORE P 1
Easily storing the adjusted/set contents in the memory
1
Press F
•
SETUP so that the function indicator becomes blue.
2
Press and hold a button from 1 to 6 for at least 2 seconds to store in the
preset No.
The following operation is performed from the head
unit.