Alpine F1 STATUS PXI-H990 - Manual (Page 71)

67
- EN
3
Press 1 ( ) or 5 ( ), select “AP SETUP”, then
press 2 (ENT).
4
Press 1 ( ) or 5 ( ), select “MULTI.CH.MGR
[Multi Channel Manager]”, then press
2 (ENT)
.
5
Press 1 ( ) or 5 ( ), select “REAR MIX [Rear
Mix]”, then press 2 (ENT).
6
Press 1 ( ) or 5 ( ), select “MODE ON/OFF
[Rear Mix ON/OFF]”.
7
When OFF, press 1 ( ) after pressing
2 (ENT)
to switch ON.
To switch from ON to OFF, press 5 ( ) after
pressing 2 (ENT).
When set to “ON”, the front audio signals (low
range) are mixed into the audio signals output
from the rear speakers.
8
Press 1 ( ) or 5 ( ), select “LEVEL [Level]”,
then press 2 (ENT).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Continued
REAR MIX
Rear Mix ON
Level 0dB