Alpine F1 STATUS PXI-H990 - Manual (Page 38)

34
- EN
Settings/Adjustments
8
Press 1 ( ) or 5 ( ), select the Equalizer type,
then press 2 (ENT).
9
Press 1 ( ) or 5 ( ), select “CH MODE
[Channel Mode]”, then press 2 (ENT).
10
Press 1 ( ) or 5 ( ), select “L or R” or “L+R”,
then press 2 (ENT).
L or R: Different adjustment values can be
set for the left and right channels.
L+R: Sets the same adjustment values for
the left and right channels.
When “L+R” is selected.
1) Press 1 ( ) or 5 ( ), select either the Lch
or Rch settings to validate and press
2 (ENT).
L->L+R: Make the present Lch settings
valid and set L/R with the same
adjustment values.
R->L+R: Make the present Rch settings
valid and set L/R with the same
adjustment values.
2) Press 6 (RTN).
○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
GRAPHIC. EQ
[Graphic EQ]
PARAMET. EQ
[Parametric EQ]
EQ OFF
[EQ Off]
Equalizer adjustments (continued)
See page 37 for “Parametric Equalizer Adjustments”.
See page 35 for “Graphic Equalizer Adjustments”.
EQ TYPE SEL
Graphic EQ
Parametric EQ
EQ Off