Samsung PS60F5500AW - Manual (Page 7)

English - 7
EnglishEnglish
Reconnecting the Smart Touch Control
If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing button
at the back of the Smart Touch Control toward the Remote receiver of the TV. The pairing button can be accessed
by removing the Smart Touch Control's battery cover. Pressing the pairing button automatically reestablishes the
connection between the control and the TV.
Battery Low Alarm
If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears
at the bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline
batteries for longer usage.
Inserting the Batteries (AAA X 2)
1 2 3
1. Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover’s notch with a
fingernail to remove the cover completely.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly
attached to the remote control.
Using the touchpad
Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu > System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Dragging Press
Drag on the touchpad in the desired direction. Move the focus or the
pointer in the direction the finger is dragging.
Press the touchpad. This selects the focused item.
[PF5500-XH]BN68-04885F-LPRL16.indb 7 2013-03-26 �� 3:29:19