Maximum Chimney Mount - Manual (Page 2)

CHIMNEY MOUNT
INSTALLATION
30 Samuel Barnet Blvd.
New Bedford, MA 02745
(508) 995-2200
Page 2
5
Feed the stainless straps around
the chimney without twisting them.
Repeat steps 4a-4d to secure the
loose strap ends to the brackets.
Cut off any excess material once
secure. Brackets should be at least
18” apart for proper mast support.
4c
STRAP
CLIP
STRAP
BOLT
CHIMNEY
BRACKET
STRAP
Bend the strap back over the strap clip.
Crimp the tabs of the strap clip securely
over the strap.
4d
18” MIN
STAINLESS STEEL
STRAP
STRAP CLIPS
STRAP
BOLT
6
ADJUSTMENT
NUTS
Tighten the stainless steel straps with the
adjustment nuts at the ends of the strap bolts.
Make sure straps are centered on bricks and
not mortar.
7
Insert the bottom of the mast into the chimney
brackets and secure with the U-clamps.
U-Clamps