Avocent EVR1500-AM - Manual (Page 14)

10 EVR1500 Installer/User Guide
NOTE: You can download the J2SE Runtime Environment from the Sun Microsystems™ web
site by typing http://java.sun.com/j2se/downloads.html in the web browser address bar.
If you do not have the J2SE Runtime Environment installed on your PC when you fi rst connect
to the EVR1500 environmental monitor appliance with a web browser, the appliance will
redirect your browser to the java.sun.com web site so that you can download and install the
correct J2SE Runtime Environment fi les on your PC.
CAUTION: Downloading the newest version of Java J2SE may affect other Java-accessible
devices. If devices are affected, check them for the most recent version of code.
Verification of Ethernet and sensor conditions
The LEDs on the front and back panels of the EVR1500 environmental monitor
appliance show the status of the appliance and the Ethernet connection. LEDs
on the front panel also indicate the status of the internal sensors. Refer to the
following table for descriptions of the LEDs on the EVR1500 environmental
monitor appliance.
Front Panel LEDs
LED Label Color Description
PWR Green When illuminated, indicates the appliance
is powered.
LINK Green When illuminated, indicates an active
connection to the network.
10/100 Amber When illuminated, indicates communication at
the 100 Mb rate. When not illuminated, indicates
10 Mb rate.
TEMP Green When illuminated green, temperature is normal.
Red When illuminated red, temperature is
over/under threshold.
HUM Green When illuminated green, humidity is normal.
Red When illuminated red, humidity is over/
under threshold.
A/F (Air Flow) Green When illuminated green, air fl ow is normal.
Red When illuminated red, air fl ow is
over/under threshold.
AUDIO Green When illuminated green, audio is normal.
Red When illuminated red, audio is over/under threshold.
NOTE: TEMP, HUM, A/F and AUDIO LEDs are controlled by the GUI confi guration for each
specifi c sensor.