Airlink101 AR675W - Manual (Page 71)

71
Reset
You can also click ‘Reset’ button to unselect all.
Click <Apply Changes> at the bottom of the screen to save the above configurations.
3.4.2 IP Filtering
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.) by their IP addresses, then you can set up the filtering rules here.
Entries in this table are restricted to use certain type of connections from the router. IP filters can
be helpful in securing or restricting your local network.
Parameters Description
Enable IP Filtering
Check this box to enable the IP filtering function.
Local IP Address
Input the IP Address you want to filter.
Protocol Choose ‘TCP’ or ‘UDP’ or ‘Both’ protocols for port
filtering.
Comment
You can input any text here as the comment of this
settings.
Current Filter Table From the table, you can check each IP filter setting.
Delete Selected If you want to delete a specific setting, check the ‘select’
box of the setting you want to delete, then click ‘Delete
Selected’ button. (You can select more than one setting).