Airlink101 AR675W - Manual (Page 38)

38
the NAT gateway of the router. Enter the port number of your
FTP server. Keep default if you don’t know what it is.
TTL F or some special applications, you might need to change the
TTL value for the packets routing to your router. Please select
‘TTL Standard’, ‘TTL+1’, ‘TTL=1’ or ‘User Defined” to define a
value. If you don’t know what it is / not sure if you need it, it’s
safe to set this option to ‘TTL Standard’. Keep default if you don’t
know what it is.
Click <Apply Changes> at the bottom of the screen to save the above configurations.
E) L2TP
Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameters Description