Airlink101 AR675W - Manual (Page 14)

14
The LAN Interface settings allow you to configure the parameters for local area network.
Parameter Description
IP Address This is the router’s local port IP address (Your LAN
clients default gateway IP address). The default IP
Address is ‘192.168.2.1’.
Subnet Mask Specify a Subnet Mask for your LAN segment. The
default subnet mask is ‘255.255.255.0’.
Step 7 Select the Internet Type for your Router.
In this section you have to select one of the five types of connections based on the service
package provided by your ISP.
Menu Description
Static IP Your ISP provides a static IP address to you while you subscribe
the service.
DHCP Client Your ISP automatically assigns an IP address to your modem.
Most Cable service subscribers use this option.
PPPoE Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection. Most DSL service subscribers use
this option.