Airlink101 AR675W - Manual (Page 46)

46
2.4 GHz (G): 2.4GHz band, only allows 802.11g
wireless network client to connect this router
(maximum transfer rate 54Mbps*).
2.4 GHz (B+G+N): 2.4GHz band, allows
802.11b, 802.11g, and 802.11n wireless network
client to connect this router (maximum transfer
rate 11Mbps for 802.11b clients, maximum
54Mbps for 802.11g clients, and maximum
300Mbps for 802.11n clients*).
Multiple APs
This access point supports Multiple APs function.
Please go to section 3.2.1.1 below for more
information.
SSID airlink101
This is the name of your wireless network. You
can type any alphanumerical characters here,
maximum 32 characters. SSID is used to identify
your own wireless router from others when there
are other wireless routers in the same area. It’s
recommended to change default SSID value to
the one which is meaningful to you, like
myhome, office_room1, etc.
Channel Width Set channel width of wireless radio. Do not
modify default value if you don’t know what it is,
default setting is ‘40 MHz’.
Control SideBand
Select the Upper or Lower band for your Control
Sideband. While Upper band is selected, the
channel number you can select is from channel
5 to channel 11. While Lower band is selected,
the channel number you can select is from
channel 1 to channel 7.
Channel Number Please select a channel from the dropdown list
of ‘Channel Number’ for broadcasting. You can
choose any channel number you want to use,
and almost all wireless clients can locate the
channel you’re using automatically without any
problem. However, it’s still useful to remember
the channel number you use, some wireless
client supports manual channel number select,
and this would help in certain scenario when
there is some radio communication problem.
Broadcast SSID Decide if the wireless router will broadcast its
own SSID or not. You can hide the SSID of your