Chatsworth Products Hot Aisle Containment - Manual (Page 6)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 6
UNPACKING
CAUTION: Aisle Containment parts can be heavy. Use a minimum of two
(2) people to unpack and remove components from the pallet.
Inspect the components for damage as they are unpacked. If any damage to the cabinet is
observed, contact your distributor or CPI Customer Service.
1. The Door Assembly components are packed in a protective crate. The upper crate will need
to be removed to access the components. Carefully remove the mounting screws from the
steel plates that tie the upper and lower crate. The upper crate will need to be lifted and set
aside.
CAUTION: The upper crate can be heavy. Use a minimum of two (2)
people to remove.
2. Individual component pieces will be individually wrapped with foam. The foam should be
used to provide protection when the components are staged on the floor prior to assembly.
Use a utility knife to cut any tape. Be careful not to allow the knife to contact the
components as this causes damage.
RECYCLABLE MATERIALS: CPI uses only recyclable materials in all of its
cabinet packaging. Please save packaging for later use or dispose of
properly. All wood components of CPI pallets have been properly treated to
comply with the pest-free certifications required by foreign countries.
3. After the all of the components have been unpacked, locate the hardware kit and inspect the
product for concealed damage. If any damage to the aisle containment solution is
observed, contact your distributor or CPI Customer Service.