Chatsworth Products Hot Aisle Containment - Manual (Page 43)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 43
ATTACHING CORNER PANELS
1. Prior to installation, both the corner panels and the center header panels should be cut
down t o allow for a 2.5” space to the ceiling.
2. Install corner panel by attaching to poly panels with clamp brackets and M6 hex nuts as
shown in the figure below, top.
3. Install center header panel by attaching to poly panels with L-clamps, M6 countersunk
screws and M6 hex nuts, as shown in the figure below, bottom.
Corner Panel Installation
Center Panel Installation