Chatsworth Products Hot Aisle Containment - Manual (Page 32)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 32
14. Attach the telescoping cover assembly to the roof structure as shown below using the
M6 front mounting nuts. Place the telescoping cover assembly onto the header such
that the end of the cover is aligned with the outer face of the end cabinet. Push front
mounting nuts into square holes in the top face of the roof beams. Use the square holes
that are visible when the outer face of the cabinet is aligned with the cover. Use large
washers provided and M8X16 screws to fasten the header cover to the beam.
15. Continue installing polycarbonate panels with edging and lateral extrusion beams to
complete assembly of roof.