Chatsworth Products Hot Aisle Containment - Manual (Page 20)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 20
GF-SERIES GLOBALFRAME GEN 1 MOUNTING
Install the Rail Support Bracket kit, PN 32771-X01, on the inside of the GF-Series
GlobalFrame Gen 1 Cabinet as shown below. Insert the slide clamp into the cabinet
horizontal slide and rotate it to a vertical position. Remove the plastic hole plug from the top
panel adjacent to the cable pass port. Mount the rail support bracket to the slide clamp with
a M8 nut; the top stud goes through the top panel hole and protrudes out the top.