Chatsworth Products Hot Aisle Containment - Manual (Page 42)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 42
ATTACHING POLY PANELS, LATERAL BRACES, AND H-CHANNELS
1. Orient the panel above the cabinet and slide one edge horizontally behind the upper frame
panel bolt. Arch the panel to clear the clamp stud on the opposite side as shown below –
top, left.
2. Install clamp brackets as shown in the image below – top, right. Position the panel 1.5” from
the ceiling and tighten the clamps to secure.
3. If a lateral brace is not used between adjacent panels, install an H-channel extrusion over
the plastic edge as shown in the image below – bottom, left. To minimize friction and ease
installation, wipe the edge of the sheet with a damp towel just prior to installing the channel.
4. If a lateral brace is used between adjacent panels, install the small L-clamps to the vertical
brace beam to secure the upper region of the panel.
5. Repeat the poly panel installation process for all remaining cabinets.