Install end and mid lateral headers – Chatsworth Products Hot Aisle Containment User Manual
Page 39
Aisle Containment Manual, Rev. 2.0
___
June 2013
Chatsworth Products
39
INSTALL END AND MID LATERAL HEADERS
1. Slightly loosen the 4 M6 nuts on the telescoping end header to allow adjustment.
2. Install the header to the end of row duct panels using M6X16 carriage bolts and M6 flange
nuts and washers. Check frame squareness and retighten the 4 M6 nuts to secure the
header length.
This manual is related to the following products: