Chatsworth Products Hot Aisle Containment - Manual (Page 28)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 28
4. Loosely install gusset brackets to convenient locations along frame. Each beam length
should have a minimum of two gusset bracket. Where longer beams are used, install
additional brackets approximately equal distances along the length of the beams. The
picture below shows the bracket installation for a GF-Series GlobalFrame Gen 1 Cabinet
using M8x16 bolts, washers, and nuts.
5. Attach neighboring beam sections using the provided splice brackets as shown using
M8X16 bolts .
6. Once all beams are supported over the roof, recheck that the beam is centered over the
aisle length so that the distances from the beam ends to the ends of the row are
approximately equal.
7. Repeat steps 3-6 for opposite side of row.