Siemens 36inc Stainless Gas Cooktop - Manual (Page 17)

17
IMPORTANT INFORMATION
body of the burner.
2 - Change the burner tips using a 7 mm socket
wrench and make sure that they are tightened all
the way in order to ensure that they are correctly
sealed. Figure 4.
The adjustment of primary air must not be performed
on these burners.
1 - Set the taps to the minimum setting.
2 - Remove the control knobs from the taps.
Figure 5.
3 - Remove the anti-spillage disc seals.
From natural gas to propane
It is necessary that all operations related with
of our Technical Service, and that the regulations
in force, as well as the requisites of the gas
companies, be followed.
IMPORTANT: Before you begin, turn off the gas
and electricity supply to the appliance.
Before connecting up the appliance to the
installation, first check that it has been adjusted
for the type of gas that is to be supplied. Our
to operate with the gas type indicated on the
specifications plate.
A)
Figure 5
T ABLE 1
Burner data
The burner must be used with the
gases indicated on the
specifications plate. G A S
TYPE
NATURAL PROPANE
Gas pressure for use 6” 10”
Burner tip marker
Burner tip marker
Burner tip marker
Burner tip marker
Burner
Rapid
Burner
s e m i -
rapid
B u r n e r
Auxiliary
Large
Burner
Triple-flame
Consumption
(Hs)
Rated
Consumption
(Hs)
Rated
Consumption
(Hs)
Rated
Consumption
(Hs)
Rated
133 95
BTU/hr
BTU/hr
BTU/hr
BTU/hr
10.000 10.000
7.000 7.000
98
106/81 72/55
5.500 5.500
15.300 15.300
110 77
Gas type changing:
1 - Remove the grates, covers and the main
installation, adjustment or adaptation LP
gas be performed by authorized personnel
The propane gas tank must be equipped with its
own high pressure regulator in addition to the
pressure regulator supplied with this unit.
The maximum supply pressure to this appliance
procedures must be completed:
with LP gas. To do so, the following
shall not exceed 14" water column (34.9 mbar).
cooktops are delivered from factory prepared
This cooktop can be adapted to work
Change of cooktop burner tips. (See table1).
B) Reduced consumption adjustment of the cooktop
burner taps.
69
Supply Pressure
Natural Gas - 7" wc (17.5 mbar) minimum.
Propane Gas - 11" wc (27.4 mbar) minimum.
7 mm.
Figure 4