Siemens 36inc Stainless Gas Cooktop - Manual (Page 15)

15
A- Minimum 6” (152 mm)
B- Minimum 6” (152 mm)
C- Minimum 30” (762 mm) D- Minimum 2” (51 mm)
E- Minimum 36” (915 mm)
F- Minimum 18” (458 mm)
19 1
/
4
”
min. 6”
min. 2 13
/
16
”
min. 7 1
/
4
”
Requirements for the cabinet
A
D
E
C
B
F
Figure 1a
Appliance installation
IMPORTANT INFORMATION
The appliance is delivered from factory with the
in place. They should not be removed under any
circumstances. The seal ensures that the entire
work surface will be watertight, and prevents water
seepage.
it is recommended to install a separator
dimensions given in the installation manual.
3 - Simultaneously press the edges so that the
where it is to be inserted into the kitchen unit.
Turn the 6 fastening clips Fig. 2 b. and screw them
tightly into the kitchen unit. Never remove them.
All operations relative to installation, adjustment
and adaptation to another gas type must be carried
out by authorized personnel from our Technical
requisites of the gas companies must be complied
with.
4 - Before connecting the appliance, ensure that
the local connection conditions, as well as the gas
type and pressure match the settings of the
appliance.
Ensure that the gas supply is cut off through the
manual shut-off valve before connecting the
The gas connection must be in a place that permits
access to the manual shut-off valve and that, if
Figure 1b
33 1
/
2
”
1 3
/
4
”
1 1
/
16
”
19 1
/
4
”
33 1
/
2
”
Figure 2a
Figure 2b
1 1
/
16
”
clips and gasket (underside edge of cooktop)
If an oven is not to be installed below the cooktop,
blocking access to the underside of the cooktop.
To install the cooktop over an oven, check the
cooktop rests on its entire perimeter. Fig. 2 a.
Place the cooktop in the middle of the opening
appliance.
Service, and the codes in force, as well as the
necessary, is visible upon opening the kitchen
cabinet door.
Maximum depth of cabinets installed above
cooktop: 13" (330 mm.)